|Browse by Catagory:
Digital Cameras: SLRs
Digital Camera Batteries
Digital Camera Lenses
Medium Format Cameras
Large Format Cameras
Medium Format Lenses
Large Format Lenses
Cases & Bags
Laptop Sleeves & Slipcases
Englargers & Accessories
Darkroom Air & Temperature Regulators
Photo Printer Paper
Frames & Albums
Accessories & Supplies
Portable CD Players
Car Audio & Video
Car Speakers & Subwoofers
Complete Audio Systems
Remote Car Alarms
Vehicle Backup Cameras
Computers -- Blank Media
Computers -- Blu-ray Media
Computers -- CD-R Media
Computers -- DVD+R Media
Computers -- DVD+RW Media
Computers -- DVD-R Media
Computers -- Processors
Computer & Monitor Mounts
Racks & Cabinets
GPS & Navigation
Marine GPS Chart Plotters
Specialty Outdoor Gear
Handhelds & PDAs
Receivers & Amplifiers
Portable Audio & Video
Digital Video Recorders
Portable DVD Players
Wireless Access Points
Batteries & Chargers
Uninterrupted Power Supplies
USB Flash Drives
Tape Backup Devices
DDR & Rambus
Memory Cards & Readers
Memory Card Readers
Memory Card Adaptors
Micro SD Cards
SecureDigital (SD) Cards
MP3 & Digital Audio
MP3 Player Accessories
Digital Voice Recorders
Sirius Satellite Radio
Electronics & Photo
|DJI Phantom 2 Vision Part 1 Replacement Intelligent Battery Pack
Lowest new price: $184.99
List price: $199.00
Replacement intelligent battery pack for Phantom 2 Vision.
The PATENTED DJI Intelligent Flight Battery(for Phantom 2 Vision), is 5200mAh.
1. Easy to Plug In and Take Out.
New connectors make plugging in the battery and pulling it out super easy.
2. Precise Battery Level Indication
Battery levels used to be estimated by measuring voltage. As the motor spins, voltage drops making these estimates inaccurate. The DJI Intelligent Flight Battery monitors the total amount of energy consumed, so it can offer a precise battery level indication.
3. Super Long Flight Time
The Phantom 2 Vision flew for 28 minutes covering around 10 miles. This has never been achieved before.
4. Integrated Battery Level Checker
Find out remaining battery levels whenever you want, without a multi-meter or battery level detector.
5. Much Easier to Recharge
All balancing and protection circuits are integrated inside the battery, making charging as simple as connecting the battery to the charger. Battery indicator lights will keep you updated on charge progress.
6. Safer than Ever
Short protection and large current protection are all integrated into the battery.
7. Increasing the Battery Life
a) In the past, if a battery is dropped it may stop working. The DJI Intelligent Flight Battery's frame protects the cells, keeping batteries safe.
b) In the past, if the battery isn't disconnected, it will drain and become unusable. The DJI Intelligent Flight Battery has low voltage protection. Once it reaches a certain limit, it will turn itself off.
- The PATENTED DJI Intelligent Flight Battery(for Phantom 2 Vision), is 5200mAh.
- Easy to Plug In and Take Out. New connectors make plugging in the battery and pulling it out super easy.
- Precise Battery Level Indication Battery levels used to be estimated by measuring voltage. As the motor spins, voltage drops making these estimates inaccurate. The DJI Intelligent Flight Battery monitors the total amount of energy consumed, so it can offer a precise battery level indication.
- Super Long Flight Time The Phantom 2 Vision flew for 28 minutes covering around 10 miles. This has never been achieved before.
- Integrated Battery Level Checker Find out remaining battery levels whenever you want, without a multi-meter or battery level detector.
|Smatree Battery(2 Packs)+Charger Kits+Head Strap Mount+Chest Belt Strap Mount+ Aluminum Thumbscrew+J-hook for Gopro HD HERO3+,HERO3,AHDBT-201,AHDBT-301, AHDBT-302
Lowest new price: $52.99
This Smatree Battery for GoPro HD HERO 3 HERO3+ is assembled with high quality battery cell which made in Japan. It comes with 1200mAh power that even exceeds original batteries. It also has long life circles( >800 times). 3 year warranty provided and 30 days money back no hassel.
We also included a head strap mount and a chest strap mount with the Smatree battery charger kits. This Head Strap mount is Compatible with ALL HERO3+, HERO3, HERO2, and HD HERO Original Cameras and fits all adjustable head strap mount for using on head and helmets. The chest strap mount lets you wear all GoPro HERO3+ ,HERO3, HERO2, and HD HERO cameras on your chest. It is a perfect chest mount for skiing, kayaking, biking, motocross, equestrian and other action sports. Lets you capture your knees & skis on the slopes, or your bike frame & handlebars. With the head and chest strap belt, it is more easy to share the filming with your friends.
2x Batteries (fit for GoPro HD HERO3, HERO3+)
1 x US wall charger (fit for GoPro HD HERO3, HERO3+)
1 x Car charger adapter
1 x European plug
1x Head Strap Mount (fit for all Gopro camera)
1x Chest Belt Strap Mount (fit for all Gopro camera)
- Smatree a size Head Strap Mount and Chest Belt Strap Mount for all Gopro cameras
- Battery and charger kits are fully compatible with GoPro HD HERO3+, HERO3,AHDBT-201,AHDBT-301, AHDBT-302
- Battery : Made with high quality Japanese cells, 1200mAh
- Package: Battery(2pcs)+ charger kit + Head Strap Mount + Chest Strap Mount+Thumbscrew+J-HOOK
- 2 year warranty,30 days money back no hassel
|Opteka X-GRIP Professional Camera / Camcorder Action Stabilizing Handle- Black
Lowest new price: $19.85
List price: $59.99
The Opteka X-GRIP handle can be used by both a professional or amateur user. This incredible support offers stability and control. The removable shoe attachment enables you to add a video light, flash or microphone. Extremely useful product for shooting events especially skateboarding and other extreme sports.
~ Fits most compact cameras and camcorders with a standard 1/4-20 thread
~ Cushioned NBR padded handle alleviates the stress of lengthy filming
~ High-grade ABS impact-absorbent plastic
~ Non-slip rubber rails
~ Shoe mount (removable) for video lights, flashes, or microphones
~ Max camera height: 4.75" (120mm)
~ Dimensions: 8.25" X 9.75" X 3.50" HxLxW (209mm X 247mm X 89mm)
~ Weight: 12.2 oz (345g) without devices
~ 1 Year Opteka Warranty
- Fits most compact cameras and camcorders with a standard 1/4-20 thread
- Cushioned NBR padded handle alleviates the stress of lengthy filming
- High-grade ABS impact-absorbent plastic
- Shoe mount (removable) for video lights, flashes, or microphones
- 1 Year Opteka Warranty
- NEEWER® CN-160 160PCS LED Dimmable Ultra High Power Panel Digital Camera / Camcorder Video Light, LED Light for Canon, Nikon, Pentax, Panasonic, SONY, Samsung and Olympus Digital SLR Cameras
- Chromo Inc.® 160 LED CI-160 Dimmable Ultra High Power Panel Digital Camera / Camcorder Video Light, LED Light for Canon, Nikon, Pentax, Panasonic,SONY, Samsung and Olympus Digital SLR Cameras
- Rokinon FE8M-C 8mm F3.5 Fisheye Lens for Canon - Black
- Brand New Np-f330, Np-530, Np-f550, Np-f570, Np-f730, Np-f750 Battery Home Travel Charger w/ Car Adapter for Sony Digital Camera & Camcorder
- Opteka OPT-SC37FE Platinum Series 0.3X HD Ultra Fisheye Lens for 25mm, 30mm, 30.5mm & 37mm Digital Video Camcorders
|Glidecam HD-2000 Hand-Held Stabilizer
Lowest new price: $493.49
Lowest used price: $445.00
List price: $499.00
|JRFOTO DSLR RIG With Follow Focus Matte Box And Counterweight By New Model JRFOTO FL02M
Lowest new price: $174.00
List price: $399.99
Model: RIG KIT M
New Added Feature Shoulder Pad With Counterweight. Here is the complete system for the DSLR or video camera owner, consisting of: Shoulder Mount, Follow Focus and Matte Box. The aim of this kit is to provide the operator maximum flexibility while shooting both outdoors and indoors. It is a very portable and handy kit.
The Shoulder Mount makes it possible to deliver excellent results without any jerk or motion problems. The shoulder mount also eliminates the fatigue brought about by trying to balance your video camera or DSLR. The configuration of the Shoulder Mount is very quick and easy and requires no tools. This is one of the best kits at this price point available on the market today.
- Gears Nylon and ABS Dial Index Adjustment : 360 degrees
- Mattebox Material: ABS Follow Focus Mounts onto 15 mm Rod Support
- Compatible with industry stand 15mm rods Shoulder Pad With Counterweight
- Gear drive can be mounted from both side Suitable for: All DSLR cameras,video cameras
- 1/4" female adapter at bottom Lens Max support up to 77mm
|Opteka SteadyVid SV-HD Camera Stabilizer with Quick Release for DSLR and Video Cameras up to 6lbs
Lowest new price: $113.00
List price: $399.00
The SteadyVid SV-HD is a lightweight stabilizing system created for DSLR cameras weighing up to 6lbs. This compact hand held system takes away the need for tripods or dolly's, giving videographers the ability to create smooth videos while the camera is in motion. It features a camera platform with both x and y adjustments, and multiple mount holes for various camera positions. The weight plate contains six weight discs to balance your camera on the stabilizer. These can be added or removed based on your need. The weights are fastened on the weight plate with 1/4" screw.
The back and forth, side to side moving SV-HD platform allows for a quick adjustment of horizontal balance while the disks on the base platform adjust the camera's vertical balance. When properly balanced, the camera floats, and the stabilizer is ready to use.
The SV-HD can be extended from 14.6″ to 23.6″ to adapt to the weight of the camera. This system is especially good for video cameras, video capable DSLR cameras and DVs.
~Maximum length: 23.6"
~Minimum length: 14.6"
~Quick release plate: 1.96"
~Weight capability: 6 lbs
~Quick release plate
- For DSLR and video cameras weighing up to 6lbs
- High precision bearings and low friction joints
- Allows high and low angle shooting
- Height adjustment improves weight ratio and reduces the need for base weights
- Aluminum construction with black powder coating
|DVC 17837 DSLR Flycam Nano Camera Stabilizer with Free Quick Release (Black)
Lowest new price: $159.00
List price: $245.00
The DSLR Flycam Nano is a lightweight stabilizing system carefully created for DSLR cameras weighing 1.5kg (3.3) to 2kg (4.4lb). This compact hand held system takes away the need for tripods or dolly's, giving videographers the ability to create smooth videos while the camera is in motion. Features a camera platform with both x and y adjustments, and multiple mount holes for various camera positions. The weight plate contains sixteen weight discs to balance your camera on the stabilizer. These can be added/removed based on need. The weights are fastened on the weight plate with 1/4" screw. The Flycam Nano has a Telescopic Sled for Perfect Balancing. Specifications: The Stabilizer is made of aluminum with black power coating Camera Platform knobs made of strong and durable plastic Soft hand-grip foam Weights made of MS & powder coating Each weight disc diameter : 65mm Each weight thickness : 4.5mm The weight fastening screw : 1/4" Stabilizer weight : 1.60 Kg (3.5lb) Weight of one weight disc : 95grm (4oz) Length of Stabilizer : 14.5" Complete Length with telescopic : 22.5" Top plate dimensions : 7" (L) x 4"(L) Diameter of sled : 23mm Color of stabilizer : Black Gimbal bearings made of Stainless Steel Compatible with the following cameras: Canon : 5d Mark II, EOS7D,1000D,40D,50D,450D,60D,1100D,30D,20D,350D,450D,Rebel XSI,XT,T2I,500D,550D,etc.
- Quick Balancing
- Easy To Assemble
- For Cameras weighing 1.5kg (3.3) to 2kg (4.4lb)
- Newly designed Flycam Stabilizer for DSLR Cameras
- Aluminum construction with black powder coating
|Glidecam HD-4000 Hand-Held Stabilizer
Lowest new price: Too low to display
Lowest used price: $469.99
List price: $599.00
- The amazingly advanced and totally re-engineered HD-Series from Glidecam
- The lightweight and state-of-the-art Glidecam HD-1000, HD-2000 and HD-4000 hand-held Camera Stabilizers will transform your hard to watch
- The Glidecam HD-4000 is designed to handle cameras in the 4 to 10 pound range.
|ML-L3 Wireless IR Remote Control Shutter Release Kit For Nikon D5300, D5200, D3200, D5100, D5000, D7000, D600, D610, D80, D90, p7000, P7100, Nikon J1, V1, Nikon 1 AW1 DSLRS(Replaces Nikon ML-L3)Cameras Includes Wireless Remote + 72 Full Tripod + More
Lowest new price: $25.95
List price: $69.95
♦ 1) 72-Inch Full Size Tripod w/ Deluxe Tripod Carrying Case
♦ 2) LCD / LENS CLEANER - Removes Dust And Finger Prints Without Scratching Your Device
♦ 3) Wireless Remote Control For Nikon Digital SLR Cameras
♦ 4) ButterflyPhoto - ButterflyPhoto Micro Fiber Cleaning Cloth
The Wireless Remote Control is for use with D40, D40X, D50, D60, D600, D610, D70, D70S, D80, D90, D3000, D5000, D5200, D5300 Coolpix P6000, N65, N75, Coolpix 8400, 8800, Pronea S, Nuvis S & Lite Touch Zoom Cameras. It acts as a wireless shutter release capable of instantly triggering the shutter without disturbing the camera, up to a distance of approximately It is recommended for taking pictures of subjects that are difficult to approach, or to minimize vibration for close-ups and time exposure.
ButterflyPhoto has Offered Top quality products for all digital cameras for over 15 years. Every product is guaranteed to work 100% perfectly and is 100% Brand New in its original Package. Each item includes a Full Worldwide warranty and is 100% sanctioned for safe use. ButterflyPhoto is a Leader In the Consumer Electronics Business, Our ratings throughout the internet are second to None.
- Wireless Remote Control For Nikon Digital SLR Cameras - Perfect accessory for shooting long time exposures for low-light photography or unusual daylight effects.
- LENS CLEANER - Removes Dust And Finger Prints Without Scratching Your Device
- 72 Inch Professional Photo Video Tripod- 3-Way Pan head, Rapid-Action Locks Legs, Built In Bubble Leveling, Quick release Platform, Rubber feet
- This Kit Includes Some Of The Essentials You Need To Take Full Advantage Of Your New Nikon D5200, D5300, D40, D40X, D50, D70,D60, D600, D610, D70S, D80, N65, N75, Coolpix 8400, 8800, Pronea S, Nuvis S Lite Touch Zoom DSLR Cameras
- Compatible with Nikon: Nikon 1 J2, J2, D5200, D5300, D40, D40X, D50, D60, D600, D610, D70, D70S, D80, D90, D3000, D5000, D5100, D7000, Nikon 1 AW1
- 52MM Professional Lens Filter Accessory Kit for NIKON D7100 D7000 D5200 D5100 D5000 D3200 D3100 D3000 D90 D80 DSLR Cameras - Includes: Vivitar Filter Kits (UV, CPL, FLD) + Carry Pouch + Tulip Lens Hood + Snap-On Lens Cap w/ Cap Keeper Leash + MagicFiber MicroFiber Lens Cleaning Cloth
- Precision Design DSLR400V High Power Auto Flash with LED Video Light for Nikon D3100, D3200, D5100, D5200, D5300, D7000, D7100, D600, D800, D4 Cameras
- 52MM Professional Lens Accessory Kit for NIKON Df DSLR (D5100 D5200 D5300 D3100, D40 D60 D80 D3200) - Includes Filter Kit (UV, Polarizing, Fluorescent) + Pouch + Lens Hood + Snap-On Lens Cap + Cap Keeper + More. Fits (18-55mm, 55-200mm, 50mm) Nikon Lenses
- 52MM Vivitar 2.2x Telephoto and 0.43X Wide Angle High Definition w/ Macro Portion Lenses for NIKON DSLR (D5200 D5100 D5000 D3200 D3100 D3000) + Premium MagicFiber Microfiber Lens Cleaning Cloth
- eForCity Leather Hand Grip Strap Compatible with Nikon D5000 D5100 D7000 D90
|Steadicam SMOOTHEE-GPROHRO Smoothee with GoPro Mount and Belt Clip
Lowest new price: $138.12
List price: $169.00
The Steadicam Smoothee is specifically designed and engineered to work with your Go Pro HD Hero/ Hero2 . Based on the same technology as the big $60,000 rigs used in Hollywood, it allows Go Pro HD Hero/ Hero2 owners to capture incredible video without the shakes normally associated with hand-held video shot on the go, right out of the box, the very first time. The Steadicam Smoothee is small and agile enough to take on vacations or follow the action at sporting events. The Smoothee lets you "fly" wherever the scene takes you--up and down steps, indoors and outside, through crowds--almost anywhere, with precise, elegant control and ease. Its quick release mount lets you instantly swap camera connections between your Smoothee and any tripod. While designed for the Go Pro HD Hero/ Hero2 the patented quick release removable mount also serves as a tabletop stand or can be mounted to any tripod with a standard ¼ x20-Inch camera mount. The comfortable ergonomic hand-grip folds up securely when not in use. Also included with the Steadicam Smoothee is a quick guide DVD on how to get the best possible shots, along with a carrying strap. The lightweight, compact, agile, and easy to use Steadicam Smoothee features an innovative, patented design built around a durable mono-frame metal structure that requires no complicated instruction to use. With its "go anywhere" compact dimensions, the Steadicam Smoothee is approximately 8-Inch W x 14.5-Inch H x 2.5-Inch D (20.3 x 36.8 x 6.4cm) in operating configuration.
- Helps eliminate shake
- Easy to use
- Studio quality stabilization
Page 1 of 337
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.