Apparel & AccessoriesBooksClassical MusicDVDElectronics & PhotoGourmet Food and GroceriesHealth & Personal CareHome & GardenIndustrial & ScientificKitchen
Popular MusicMusical InstrumentsOutdoor LivingComputer HardwareComputer SoftwareSporting GoodsToolsToys and GamesVHS VideoVideo Games

Search:

Browse by Catagory:

Electronics & Photo

Amplifiers


Boss Audio R1100M Mosfet Monoblock Power Amplifier with Remote Subwoofer Level Control

Boss Audio R1100M Mosfet Monoblock Power Amplifier with Remote Subwoofer Level Control Lowest new price: $45.99
Lowest used price: $49.55
List price: $133.00
Brand: BOSS
Model: R1100M

View larger
Class A/B Topology

A class A/B amplifier uses two groups of transistors and it is generally considered to be the best compromise of the two classes put together. A pure class ‘A’ amplifier typically has an enormous amount of current flowing through its output transistors with no audio signal. A pure class ‘B’ amplifier has no current flowing through its outputs with no audio signal. This eliminates virtually all of the crossover distortion that’s possible with class ‘B’ amplifiers. A class A/B amplifier is much more efficient than a class ‘A’ but without the possible distortion of a class ‘B’.

MOSFET Power Supply

Metal–Oxide–Semiconductor Field-Effect Transistor is a transistor used for amplifying or switching electronic signals. We use it in computers, telephones, game consoles, cars, electrical appliances, and in our amplifiers. They are found in systems where information is processed or stored. A MOSFET is basically an electrical switch that allows the flow of electrical current. The MOSFET performs its most important role in our D Class amplifiers by allowing or preventing the flow of power and creating an efficient amplifier.

General Features

  • Two ohm stable stereo operation with output power increase
  • Thermal, overload, and speaker short protection
  • Soft turn-on circuit
  • Remote turn on / turn off circuit
  • LED power and protection indicators
  • Black anodized heatsink
  • Nickel plated low level and high level inputs

What Comes In The Box?

  • Remote subwoofer level control
  • High input cable with connector
  • Instruction manual
  • Mounting screws

Low And High Level Inputs
View larger
Low And High Level Inputs

You can get a signal into RIOT series amplifiers two different ways - Low level and High level input. A low level input is measured in voltages. It comes in the form of RCA outputs from the back of your receiver and goes to the RCA inputs on your amplifier. A high level input is measure in wattages. It comes in the form one positive and one negative wire from the back of your receiver to and goes to the input terminal of your amplifier in the same wire form. Low-level (RCA) input wiring is preferred for best audio performance. Always use a high-quality RCA cable for best audio performance. Note: Do not connect both the high level and low level inputs from your receiver to your amplifier at the same time.

Variable Bass Boost
View larger
Variable Bass Boost

With the R1100M amplifier you have Variable Bass Boost, which gives you control of exactly how much bass you want to pump out to your subwoofer(s).

Variable Crossover
View larger
Variable Crossover

Subwoofers reproduce sound based low range frequencies. This process is called the crossover effect and occurs because the vast majority of audio systems cannot cover the entire spectrum sufficiently to minimize sound distortion and maintain an appropriate frequency ratio. In the case of our R1100M amplifier, a variable crossover is offered so that you, the listener, have the ability to set the frequency at which the crossover occurs, thereby setting precise sound specifications on your subwoofer.

Features:

  • MOSFET Monoblock Power Amplifier
  • Remote Subwoofer Level Control Included
  • Blue Illuminated BOSS Logo
  • Max Power @ 2 Ohms: 1100 Watts
  • RMS Power @ 4 Ohms: 250 Watts

Similar Products:


Lanzar HTG157 3000-Watt 2-Ohm Monoblock Mosfet Amplifier

Lanzar HTG157 3000-Watt 2-Ohm Monoblock Mosfet Amplifier Lowest new price: $68.27
Lowest used price: $64.06
List price: $191.99
Brand: Lanzar
Model: HTG157

Sound huge with the HTG157 from Lanzar. This mono-block amplifier is part of our Heritage series, known for its clarity, quality, and performance. Pushing 3,000 watts at 2 ohms, this amp has plenty of Power. The bass boost circuit lets you bump up the low end. Pre-amp line outputs for left and right channel make installation of a second amplifier a breeze. Silver-coated RCA inputs ensure a high-quality connection between your amp and head-unit or other audio source. With soft turn-on/turn-off to prevent damage to your speakers, low pass filter, and power and protection LED indicators to let you know your equipment is safe and secure.

Features:

  • 1 x 650W RMS at 4 OHMS - Bass Boost Circuit - Power and Protection LED Indicators - LPF Freq. Response: 50Hz-250Hz
  • 1 x 1250W Peak at 4OHMS - 2 Ohm Stereo Stable - Soft Turn-on/Turn-off - Fuse: 40A x1
  • 1 x 1500W RMS at 2 OHMS - Silver RCA Inputs - THD: <0.01%. - Dimensions:12.99''(L) x 2.24''(H) x 8.81''(W)
  • 1 x 3000W Max at 2 OHMS - Line Outs for Left and Right Channel - S/N Ratio: >90dB
  • Electronic Crossover Network - Low Pass Filter Controls - Freq. Response:10Hz~45KHz

Similar Products:


Planet Audio AC4000.1D 4,000-Watt Max Power Class D Monoblock Power Amplifier

Planet Audio AC4000.1D 4,000-Watt Max Power Class D Monoblock Power Amplifier Lowest new price: Too low to display
Lowest used price: $95.95
List price: $420.00
Brand: Planet Audio
Model: AC4000.1D

View larger
Class D Topology

A class-D amplifier or switching amplifier is an electronic amplifier where all power devices (usually MOSFETs) are operated as binary switches. They are either fully on or fully off. Ideally, zero time is spent transitioning between those two states. In this way, power loss is significantly reduced and making a D class amplifier anywhere from 75% to 95% efficient. To maintain high efficiency, the filter is made with purely reactive components (inductors and capacitors), which store the excess energy until it is needed instead of converting some of it into heat. Some other advantages include reduction in size and weight, reduced power waste as heat dissipation and hence smaller (or no) heat sinks, and reduction in cost due to smaller heat sink and compact circuitry.

MOSFET PWM (Pulse Width Modulated) Power Supply

Metal–Oxide–Semiconductor Field-Effect Transistor is a transistor used for amplifying or switching electronic signals. We use it in billions of them. In our computers, our telephones, game consoles, cars, electrical appliances and in this case, our Amplifiers. They are found in systems where information is processed or stored. A MOSFET is basically an electrical switch that allows the flow of electrical current. An electrical switch has two possible states, ON or OFF. This is where the MOSFET performs its most important role in our D Class amplifiers by allowing or preventing the flow of power and creating an efficient amplifier. The “Pulse Width Modulated” is a design that is significantly simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. The PWM can increase efficiency, is lighter, smaller, can reduce total cost, productivity and system reliability.

1 Ω Stable

The AC4000.1D is a 1-Ohm stable amplifier which is able to continuously power loads of 1-Ohm X 1 channel without encountering difficulties such as overheating. Almost all car amplifiers are at least four ohm stable and some are two ohm stable. 1-Ohm stable amplifiers are typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to perform.


View larger
Variable Phase Shift

This function on the amplifier comes in handy for custom installations where you might need to have your speakers or subwoofers mounted the non-traditional way with the magnet facing out. You can set the Phase anywhere from 0 degrees to 180 degrees. What this does is that it reverses the polarity (Positive/Negative) on your subwoofer terminals which in turn reverse the direction of the low frequency boom that you are used to hearing.

View larger
Variable Low-Pass Crossover

Subwoofers reproduce sound based on a number of different low-range frequencies. This process is called the crossover effect and occurs because the vast majority of audio systems cannot cover the entire spectrum sufficiently to minimize sound distortion and maintain an appropriate frequency ratio. In the case of our AC4000.1D amplifier, a variable crossover is offered so that you, the listener, can have the ability to set the frequency at which the crossover occurs, thereby setting specific sound specifications for the bass frequency reproduction.

View larger
Low Level Inputs With Pre-Amp Outputs

A low level input is measured in volts. It comes in the form of RCA (low level) outputs on the back of your head unit and goes to the RCA inputs on your amplifier (Right/Left). With that in mind, you can take control of more power by connecting more amplifiers together using the RCA pre-amp outputs (Right/Left) from your primary amplifier straight to the RCA inputs of a second or satellite amplifier (Right/Left).

View larger
Variable Subsonic Filter

Subwoofers start to bottom out trying to reproduce low-frequency signals that are below their abilities to sound off. Bottoming out is more a mechanical problem and happens when the subwoofer driver reaches the limit of its excursion and creates a clacking or flapping sound instead of the low frequency entering its voice coils. If your sub is bottoming out, short of changing the driver into one that has better low-frequency handling, you can try the AC4000.1D which has a subsonic filter to filter out frequencies below its specified low frequency limits.

View larger
Variable Bass Boost (0 to +18 dB)

The difference between Bass Boost and Variable Bass Boost is that with Bass Boost you either have extra bass or you don’t. But with Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s). This is what you get with the AC4000.1D Amplifier: Variable Bass Boost.

View larger
Strapping Capable

You are able to strap your AC4000.1D amplifier to another Anarchy class D amplifier and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.

Features:

  • Switchable Input Sensitivity: 100mV-2V or 2V-8V
  • Switchable Phase Shift (0-180º)
  • Variable Bass Boost (0 to +18dB)
  • Continuously Variable Low Pass Crossover
  • Strapping Capability: Strap two amps together for twice the power

Similar Products:


Rockford Fosgate PBR300X4 Punch BRT 300-Watt Ultra Compact 4-Channel Amplifier

Rockford Fosgate PBR300X4 Punch BRT 300-Watt Ultra Compact 4-Channel Amplifier Lowest new price: Too low to display
Lowest used price: $139.83
List price: $269.99
Brand: Rockford Fosgate
Model: PBR300X4

Rockford Fosgate Punch 2011 or newer P1 or P2 Series Subwoofer Grille. A cost effective way to protect your subwoofer. Uses existing subwoofer trim ring.

The PBR300X4 is a full-range 4-channel amplifier designed for stereo front/rear systems that requires little space. Rockford's Boosted Rail Technology provides an ultra efficient-design generating 300 Watts of power, and the amplifier also boasts a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Great for motorcycles and recreational vehicles.

Rockford Fosgate Punch Series Amplification

For over 25 years, Punch amplifiers have set the standard in the car audio amplifier industry and they continue to do so today. It's the reason that they have become the most popular amplifiers in the world. Each of the Punch family amplifiers reproduce sonic perfection along with impressive power in a compact chassis.


Rockford Fosgate PBR300X4
A full-range 4-channel amplifier designed for stereo front/rear systems that requires little space.

300 Watts in an Ultra-Compact Amplifier

CEA-2006

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

Discrete Surface Mount

DSM--An industry-leading manufacturing process, DSM utilizes high-speed robotics, high-quality 1% tight-tolerance parts and large board traces. The discrete components are laser etched to meet a particular value and a very low tolerance. This lower tolerance improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature. These superior components are used by aerospace, automotive, and cellular manufacturers.

Dynamic Thermal Management

Heat is often inefficiently dissipated across a heatsink causing "hot spots". This impacts important design goals, which are:

  • Keeping internal components cool.
  • Maximizing potential of all components.
  • Reducing distortion for better sound quality.
  • Increasing efficiency to produce more power.

Rockford Fosgate engineers have developed an award winning cooling design called DTM. This patent pending design seamlessly manages the output of power supply temperatures, while evenly distributing the excess heat across the entire amplifier.

MEHSA3

MEHSA3 (Maximum Efficiency Heat Sink Application--gen. 3) is a proprietary process that yields up to five times better heat transfer than traditional FET mounting techniques, using the exact same components. A multi-layer insulated metal substrate operating with minimal thermal resistance spreads heat both downward & outward to quickly dissipate heat from each device across the heatsink. This process combined with our optimized heatsink designs, DSM (Discrete Surface Mount) technology and MOSFET devices, allows Rockford Fosgate to squeeze more watts per cubic inch from every output device as well as provide consistent thermal stability. The 3rd generation creates a dielectric layer between the ceramic topside and the aluminum base that retains all of the electrical isolation and capacitive coupling of the original MEHSA material increasing it's thermal conductivity. The higher power handling results in a 20% reduction in thermal impedance.

Rockford Fosgate PBR300X4
Discrete surface mount componenents for ultra-efficient operation and lower operating temperatures.
NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

Punch EQ2

In the early 70's, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would graph out the acoustical characteristics of each car he tested. Jim discovered three problems that were common to all cars:

  • A midbass hump between 100-275Hz
  • A steep roll-off of high frequencies from 2kHz up to 20kHz
  • Reduced bass response below 50Hz

The Punch EQ on-board equalization circuit helps correct for these acoustical deficiencies in the listening environment. When set to Low-Pass(LP) operation, it becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.

About Rockford Fosgate

Setting the standard for excellence in the audio industry, the Rockford Corporation markets and distributes high-performance audio systems for the mobile audio aftermarket and OEM market. Headquartered in Tempe, Ariz., Rockford Corporation is a publicly traded company and manufactures its products under four brands: Rockford Fosgate, Rockford Acoustic Design, Lightning Audio and InstallEdge.com.


PBR300X4 Specifications

Number of Channels: 4
Rated Power: 75 Watts x 4 @ 4-Ohms
Total Power: 300 Watts
Dynamic Power: 300 Watts @ 0 degrees RES
Bridgeable: No
Crossover Controls: Selectable 80Hz LP/AP/80Hz HP @ 12dB/Octave
Signal Input: Hi-Level: Variable DC offset sensitivity
High-Level: harness
Low-Level: 2 Pair RCA
Power Input Connector: Block Harness
Power Wire Gauge: 10 AWG
Speaker Output Connector: 4-Pin Harness
Speaker Wire Gauge: Harness 16 AWG
Heat Sink Type: Extruded aluminum
Cooling: Convection
Visual Indicators: Power, Protect, Boost
Circuit Topology Class: Class BR
Frequency Response: 20Hz - 20kHz +/-1dB
Dimensions (HxWxL): 1.53" x 4.25" x 6.75"
(3.90cm x 10.8cm x 17.2cm)

What's in the Box

Rockford Fosgate PBR300X4 Amplifier, Speaker Output Harness, Input Harness, Documentation

Features:

  • Four-channel, 4-ohm (only) amplifier with 75 Watts x 4 @ 4-Ohms RMS power rating and 300 watts RMS total power
  • Designed for stereo front/rear systems that require little space--just 1.53 x 4.25 x 6.75 inches
  • High- and low-level inputs with variable 4-6 volt hi level DC offset voltage input turn-on control
  • Selectable 80Hz LP/AP/80Hz HP filter @ 12dB/Octave
  • One-year limited warranty

Similar Products:


Boss AR1500M ARMOR 1,500-Watt Mono Mosfet Amplifier

Boss AR1500M ARMOR 1,500-Watt Mono Mosfet Amplifier Lowest new price: Too low to display
List price: $159.00
Brand: BOSS
Model: AR1500M

View larger
Class A/B Topology

A class A/B amplifier uses two groups of transistors and it is generally considered to be the best compromise of the two classes put together. A pure class ‘A’ amplifier typically has an enormous amount of current flowing through its output transistors with no audio signal. A pure class ‘B’ amplifier has no current flowing through its outputs with no audio signal. This eliminates virtually all of the crossover distortion that’s possible with class ‘B’ amplifiers. A class A/B amplifier is much more efficient than a class ‘A’ but without the possible distortion of a class ‘B’.

MOSFET Power Supply

Metal–Oxide–Semiconductor Field-Effect Transistor is a transistor used for amplifying or switching electronic signals in our computers, our telephones, game consoles, cars, electrical appliances, and in this case, our amplifiers. They are found in systems where information is processed or stored. A MOSFET is basically an electrical switch that allows the flow of electrical current. An electrical switch has two possible states, on or off. This is where the MOSFET performs its most important role in our D Class amplifiers by allowing or preventing the flow of power and creating an efficient amplifier.

General Features

  • Two Ohm stable operation with output power increase
  • Thermal and speaker short protection
  • Soft turn-on circuit
  • Remote turn on / turn off circuit
  • Gunmetal gray anodized heatsink

Low And High Level Inputs
View larger
Low And High Level Inputs

You can get a signal into Armor series amplifiers two different ways - Low level and High level input. A low level input is measured in voltages. It comes in the form of RCA outputs from the back of your receiver and goes to the RCA inputs on your amplifier. A high level input is measure in wattages. It comes in the form one positive and one negative wire from the back of your receiver to and goes to the input terminal of your amplifier in the same wire form. Low-level (RCA) input wiring is preferred for best audio performance. Always use a high-quality RCA cable for best audio performance. Note: Do not connect both the high level and low level inputs from your receiver to your amplifier at the same time.

LED Power and Protection Indicators
View larger
LED Power And Protection Indicators
Variable Crossover
View larger
Variable Crossover

Subwoofers reproduce sound based low range frequencies. This process is called the crossover effect and occurs because the vast majority of audio systems cannot cover the entire spectrum sufficiently to minimize sound distortion and maintain an appropriate frequency ratio. In the case of our AR1500M amplifier, a variable crossover is offered so that you, the listener, can have the ability to set the frequency at which the crossover occurs, thereby setting precise sound specifications on your subwoofer.

Nickel Plated RCA Low Level and High Level Inputs
View larger
Nickel Plated RCA Low Level And High Level Inputs
Bass Boost
View larger
Bass Boost

Set this dial to your liking and your subwoofers will get that extra kick in the pants that they are looking for, called Bass.

Fuses, Speaker, and Power Connections
View larger
Fuses, Speaker, And Power Connections

Features:

  • MOSFET Monoblock Power Amplifier
  • Remote Subwoofer Level Control Included
  • 1500 W x 1 Max Power,700W x 1 RMS Power
  • > 105 dB Signal-To-Noise Ratio
  • Special Shipping Information: This item cannot be returned to Amazon.com. For additional information concerning this policy, please visit our Product Specific Returns Policy Page

Similar Products:


Rockford Fosgate Prime 1,200-Watt Class-D 1-Channel Amplifier

Rockford Fosgate Prime 1,200-Watt Class-D 1-Channel Amplifier Lowest new price: Too low to display
Lowest used price: $200.00
List price: $449.99
Brand: Rockford Fosgate
Model: R1200-1D

New Rockford Fosgate Prime 1200 Watt Class D 1 channel Amplifier

Features:

  • Tri-stage protection covers thermal, over-current and short circuits.
  • On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
  • Variable crossover 12dB/octave slopes
  • Infrasonic filter
  • Optional Remote PEQ (Level control)

Similar Products:


Pyle PLMRA400 400-Watt 4-Channel Waterproof Marine/Car Amplifier

Pyle PLMRA400 400-Watt 4-Channel Waterproof Marine/Car Amplifier Lowest new price: Too low to display
Lowest used price: $43.52
List price: $128.99
Brand: Pyle
Model: PLMRA400

Pyle Marine 4 channel 400W amplifier

This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool--it's completely waterproof. This 4-channel, 400-watt marine amp takes both high- and low-level inputs, so it's compatible with a variety of head units and sources. Remote turn/on off makes controlling the amp a breeze, and gold-plated RCA inputs mean it won't be a weak link in your setup.

Pyle PLMRA400
Power your speakers on the dock, in your boat, or by the pool. Click here for a larger image
Pyle PLMRA400 Diagram
View a connection diagram. Click here for a larger image
Input Options

The PLMRA400 features low-level RCA inputs for sources that use RCA-type connectors. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs.

Input Level Control

Adjust the line level input for the least amount of distortion to match your source unit.

Protection

Protect the amp and your vehicle's electrical system from short circuit conditions with built-in fuse protection, along with overload, thermal and short circuit protection. A heavy duty aluminum alloy heatsink helps prevent any thermal issues.

4 or 8 Ohm Speaker Impedance

The PLMRA400 is ready for either 4- or 8-ohm speakers, in pair.

Remote Turn-On/Off

Wire the PLMRA400 to turn on and off in tandem with your receiver/head unit.

Pyle PLMRA400 Select Specifications

Power Rating: 100 Watts x 4 Maximum
Power Supply Voltage: 14.4V DC Neg. Ground (10.5-16V)
Frequency Response: 15 Hz-30 KHz
Input Impedance: Low Level: 10K Ohms
High Level: 100 Ohms
Input Sensitivity: Low Level: 250mV
High Level: 2.5V
Dimensions: 7.87 x 2 x 8 Inches (L x W x H)
Weight: 3.3 lbs.
What's in the Box

Pyle PLMRA400 Amplifier, Mounting Hardware, User's Manual

Features:

  • PYLE PLMRA400 4 Channel Waterproof Amp Marine/Car Amplifier
  • 400 Watts Output Power (100 Watts x 4 Channels)
  • Heavy Duty Aluminum Alloy Heatsink
  • Gold Plated Speaker Terminals & Low Level RCA Inputs - High Level Inputs
  • Full Manufacturer's 1 Year Warranty

Similar Products:


Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier

Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier Lowest new price: Too low to display
Lowest used price: $127.25
List price: $209.99
Brand: Rockford Fosgate
Model: R500X1D

The Prime R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control.

Rockford Fosgate performance in a small package - this Prime Series R500X1D mono amp can drive a sub with up to 500 watts RMS, so you can really feel your bass rockin'. You can use the low-pass filter and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle. A phase switch gets your subs firing along with your other speakers for maximum impact, while the speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

Remote PLC (Punch Level Control) 0 /180 Phase Switch Real time output and power supply thermal sensing Cast aluminum heatsink 4 Gauge power/ground connectors MOSFET power supply Over current protection Short circuit protection Muted turn on 1 Year Standard Warranty

Features:

  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter
  • On-board Punch EQ with +18dB boost at 45Hz
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • Includes wired remote (Punch Level Control)

Similar Products:


Pioneer GM-D8604 Class FD 4-Channel Bridgeable Amplifier

Pioneer GM-D8604 Class FD 4-Channel Bridgeable Amplifier Lowest new price: Too low to display
List price: $250.00
Brand: Pioneer
Model: GM-D8604

Pioneer GM Digital GM-D8604 Car Amplifier - 4 x 100 W @ 4 Ohm - 4 x 150 W @ 2 Ohm - 1200 W PMPO - 4 Channel - Class FD GM-D8604 Car Amplifiers

Features:

  • Class FD 4-Channel Amplifier
  • 4-channel car amplifier, 1,200 watts max power.
  • Compact design for versatile installation options
  • Extreme efficiency and high-quality sound
  • 1 to 8 load impedance allowance (Ù)

Similar Products:


Alpine MRV-M500 Mono subwoofer amplifier - 500 watts RMS x 1 at 2 ohms

Alpine MRV-M500 Mono subwoofer amplifier - 500 watts RMS x 1 at 2 ohms Lowest new price: $149.95
Lowest used price: $199.22
List price: $171.86
Brand: Unknown
Model: MRV-M500

  • 500W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
  • 300W RMS x 1 (4Ω, 14.4V, ≤1% THD+N)
  • Same power in a 40% smaller chassis
  • Evolution to Class D digital platform
  • New snap-on terminal covers for easy installation

    Features:

    • 500W RMS X 1 (2Ω, 14.4V, ≤1% THD+N)
    • 300W RMS X 1 (4Ω, 14.4V, ≤1% THD+N)
    • Evolution To Class D Digital Platform
    • New Snap-on Terminal Covers For Easy Installation

    Similar Products:


  • Next >>
    Page 1 of 528

    [Kindle]    [Kindle DX]
      Privacy Policy

    CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.