|Silicone Grease 2.0 oz. Jar
Lowest new price: $8.03
If you dive you need to have silicone grease in your Save-A-Dive Kit. Silicone Grease permeates the surface and engages the material in an in-depth conditioning cycle that lasts for several weeks until more is applied. The product conditions most rubber items and is used in a flexible gasket capacity to seal items such as O-rings against their housings, without cracking or splitting the rubber. Used by underwater photographers for their camera housings and divers that dive with lights computers, metal detectors, or any accessory items that has O-Ring seals. Great alternative and less expensive lubricant if only diving air, silicone grease will do the job, keep O-Rings and gasket seals supple and flexible so they can perform protective sealing of your equipment . Two ounce re-sealable container will give you years of service.
- Increases Life of Rubber Products
- Great for O-Ring Seals
- Conditions and Permeates Rubber Surfaces
- Great Save-A-Dive Kit Item
|Innovative 200 pieces O-Ring Kit with 3 Assorted Brass Picks
Lowest new price: $30.25
Brand: Innovative Scuba Concepts
If you work on dive gear you know the importance of having the correct O-rings. Many of the O-rings used on cylinders, valves and regulator hoses are pretty much generic. Having a large selection of common O-rings is a must for the serious repair technician. All Innovative shop O-ring kits now come with 3 multi-use brass picks included! Buna Rubber O-ring Kit: 200 pieces of 18 most popular sizes! Kit comes in a top load sectioned (with Labeled Cover) plastic box for organizing all the different size O-rings.
- 200 Piece Kit
- 18 Most Popular Size O-Rings
- 3 Multi-Use Brass Picks
- Buna Rubber O-Rings
- Labeled Organizer Box
|New Scuba Diving Tank Valve Plug with Fine Threads for Hollis, XS Scuba, Thermo, Diverite & Sea Elite Modular Valves (Left Hand with No Notch)
Lowest new price: $9.95
You have a set of doubles with a Manifold, yet you don't always need the large air capacity when diving. Rather than spending a lot of money on multiple cylinder systems, this handy plug allows you to convert your double manifold left hand valve into a single cylinder valve system. Manufactured from durable chrome plated marine grade brass and comes complete with double O-Rings ready to install.
The "jam nuts" also have the notch (Right) and no-notch (Left) identification. This helps to make sure that Rights go with Rights and Lefts go with Lefts.
Always make sure you thread your valves together correctly, otherwise damage to the threads may occur.
- Converts your double manifold left hand valve into a single cylinder valve system
- Nut does not have small "notches" perpendicular to wrench flats to identify the Left Hand (R) designation
- Durable Marine Grade Chrome Brass Construction
- Left Handed Configuration with No Notch
- Complete with Double O-Ring Seals
- Plug has fine threads
- Plug does fit Hollis, XS Scuba, Thermo, Diverite, Sea Elite and valves with fine threads
- Plug does not fit OMS, Blue Steel or valves with course threads
- Easy to Install
|Trident Replacement Purge Valves for Your Snorkel
Available in 18mm or 20mm.
For replacing the purge valve on your snorkel.
- Available in 18mm or 20mm
- For replacing the purge valve on your snorkel
- House of Scuba is an authorized Trident dealer
|Analox Sensor Saver Cap
Lowest new price: $16.95
List price: $20.00
If you have Amoxtec Sensor this cap helps to reduce the sensors exposure to oxygen and extend its life. Cap is designed to be used with the O2EII oxygen analyzer, and is manufactured from impact resistant non-corrosive plastic with an O-Ring seal.
- Used with 02EII Oxygen Analyzer
- Reduces Sensor's Exposure to Oxygen
- Extends Sensor's Life
- Impact Resistant O-Ring Sealed
|XS Scuba Pro K 3300 PSI Scuba Tank Valve
Lowest new price: $65.95
List price: $75.95
Brand: XS Scuba
XS Scuba Pro Valve, Standard yoke outlet w/ spin-out adaptor converts to 230 bar DIN outlet, 3/4 in.-14 NPSM inlet, Clean for pre-blended Nitrox up to 40% FO2.PRO ValveVA200FEATURES Standard yoke outlet w/spin-out DIN insert converts to 230 bar DIN outlet 3/4" - 14 NPSM standard inlet threads Clean for pre-blended Nitrox up to 40% FO2 oxygen O-ring sealed bonnet Easy grip rubber handwheel Threaded dip tube included Service pressures: 2400, 3000, 3442 psi
- This Product Comes Complete With A Full Manufacturer Warranty.
|Mares "300 Bar" (4,350 psi) DIN Conversion Kit for MR42, MR22 Regulators
Lowest new price: $81.00
List price: $80.00
You started diving with yoke style cylinder valves, but you feel the higher cylinder pressure available with DIN cylinders will be an advantage to your style of diving. Well this kit will allow you to do just that, shed the yoke and increase bottom time with this 300 bar (4,350 psi) DIN conversion kit for MR42 and MR22 Regulators. 300 bar (4,350 psi) DIN Kit is made of marine grade chrome plated brass complete with O-rings so it's ready to install on your Mares first stage regulator. Like all Mares regulators and regulator components it comes with a limited lifetime warranty.
- Mares "300 Bar" (4,350 psi) DIN Conversion Kit for MR42, MR22
- Increased Bottom Time
- Fits Multiple Mares Regulators
- 300 bar (4,350 psi)
- Easy to Install
|Storm Derlin Dust Cap for Din Scuba Tank Valve
Lowest new price: $7.98
Brand: Storm Accessories
Derlin Dust Cap for Din Valves. This plug is for manifolds and valves and fits both 200-300 Bar
- Comes in Black only
- Fits both 200-300 bar
|New Adapter Converts 3/8" Male First Stage Scuba Diving Regulator Port to 1/4" NPT Male Fitting
Lowest new price: $7.95
Adapter connects to 3/8" port on 1st stage scuba regulator and converts to 1/4" NPT Male fitting
- Goes between between first stage regulator and any tool or hose that requires a 1/4" NPT male connection
|Seal for American Standard Champion
Lowest new price: $4.88
Brand: Lavelle Industries
LAVELLE" AMERICAN STANDARD
CHAMPION FLUSH VALVE SEAL
*Engineered of red chlorazone
material which resists
chlorine or all other harsh
*Replaces American Standard
OEM part no. 738651-0070A
- Engineered of red chlorazone material which resists chlorine or all other harsh water chemicals
- Replaces American Standard OEM part no. 738651-0070A