| Browse by Catagory:
Platform Trucks
Job Site Office
Radios
Safety Equipment
Work Wear
Pool & Deck Repair Producs
Slides, Ladders & Diving Boards
Tool Storage
Agricultural Equipment
Bosch
Delta
DeWalt
Dremel
Guardian
Hitachi
HyLoft
Ingersoll-Rand
Kreg
Leatherman
Makita
Milwaukee
MK Diamond
Mr. Heater
MTD
Qual-Craft
Porter-Cable
Powermatic
Racor
Robotoolz
Ryobi
Shop-Vac
Skil
Stabila
Stanley
Toro
Trojan
Troy-Bilt
Vice-Grip
Wagner
Yamaha
|
Tools
Powermatic
| Powermatic 1791310 PM701 3/4 Horsepower Bench Mortiser
Lowest new price: $489.99
List price: $581.00
Brand: Powermatic
Model: PM701
|
1791310 Features: -Benchtop deluxe mortiser.-701 PM. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 17.4'' H x 19.2'' W x 24.2'' D.
Features:
- 3/4-horsepower bench mortiser with 1/2-inch chuck, in-line depth stop, and 5/8- and 3/4-inch bushing sizes
- Operates up to 1,725 rpm, 5-1/2-inch head stroke capacity, reversible handle for left/right-hand operation
- Some assembly required
- Includes mortiser, 3/4-inch chisel bushing, chuck extension adaptor, chuck key, and handle
- 16-5/16-by-13/3-4-inch base; 93-pounds; 1-year warranty
Similar Products:
|
|
| Powermatic PM1200 1791330 Air Filtration System
Lowest new price: $439.99
Lowest used price: $405.10
List price: $521.00
Brand: Powermatic
Model: PM1200
|
The Powermatic Air Filtration System traps up to 99% of all 5-micron particles and 85% of all 1-micron particles for a healthier work environment. Three blower speeds modify air flow. The unit can be operated either at the cabinet or with the remote transmitter which uses radio-frequency, eliminating the need for line-of-sight operation. The timer has 9 settings, allowing continuous operation for up to 9 hours while you're away, and will shut off at the end of that period. The filter guards can be removed and installed without tools, for instant filter access. Amps: 3, Remote Included: Yes, Timer: 1-9 hours, Speeds (qty.): 3, Filtration (Microns): (1) Inner, (5) Outer, Motor Phase(s): Single, HP: 1/4, Motor Voltage: 115, Overload Protection: Yes
The Powermatic PM1200 Air Filtration System uses a two-step filtration process to trap up to 99% of five-micron particles and 85% of one-micron particles. This unit can be operated at the cabinet or with the included remote radio frequency transmitter. It includes necessary hardware for mounting to the ceiling and comes with filter guards that can be installed and removed without tools.  | The PM1200
Air Filtration System
At a Glance:
- Double filtration system traps particles as small as 1 micron
- Remote control operates on radio frequency for wider range
- Includes timer with 9 settings for up to 9 hours of continuous operation
- Includes 4 eye bolts for suspension from shop ceiling
- Indicator lights up after 200 hours to remind user to replace filters
|
|  |
|
The PM1200's two-step filtration system captures particles as small as one micron. View larger. | 
The exit filter disperses clean air, providing you with a debris-free work environment. View larger. |
Traps 99% of Five Micron and 85% of One-Micron Particles
Designed to strike the proper balance between air flow and filtration, the PM1200 is ideal for the professional woodworking shop, where dirt and debris can compromise air quality. The PM1200 uses two filter stages: the outer filter captures large particles and the inner filter catches the smaller particles that pass through the outer filter. The electrostatic, disposable outer filter removes 99% of five-micron particles, while the inner filter captures 85% of one-micron particles and has high-mesh pockets that can be blown clean. Readily-Available, Durable Filters
For easy maintenance, the PM1200 uses intake filters measuring 24.0 x 12.0 x 1.0 inches (WxHxD), a readily available size. The exit filter does not require replacement and can be periodically cleaned with a vacuum or compressed air to ensure efficient operation. Both the inlet and outlet filter guards are easy to install and remove without tools. The system grilles are secured via simple, finger-operated catches--they come off easily but stay securely in place during use. Full Set of Controls to Save Energy
Because woodworking shops have fluctuating levels of dust, the PM1200 features a full set of controls, all of which are conveniently located both on the system itself and on the included remote control with easy-to-read LCD screen. Set one of the three available speeds--Low (547 CFM), Medium (706 CFM), or High 1,196 (CFM)--to match current conditions and save on energy costs. To ensure long-term performance, the PM1200 also boasts a programmable timer with nine settings for up to nine hours of operation, a re-settable pop-out fuse that protects the unit in case of a power surge, and a "change filter" light that automatically comes on after 200 hours of use.The PM1200 is backed by a five-year warranty. What's in the Box
Air filtration system; remote control with mounting bracket; nine-volt battery; four eye bolts; four hex nuts; four flat washers; manual; and warranty card.
| 
The on-board panel and remote control allow you to use the PM1200 from anywhere. View larger. |
Features:
- 3 filter system includes a diffuser to disperse exhaust air
- Remote control operates on radio frequency for wider range of effectiveness
- Timer has 9 settings for up to 9-hours of continuous operation
- Inner filter has fine mesh pockets for high efficiency can be blown or washed clean
- Electrostatic outer filter is disposable
Similar Products:
|
|
| Powermatic 1610079 Model PJ882 8-Inch 2 Horsepower Parallelogram Jointer, 230-Volt 1 Phase
Lowest new price: $2,244.99
List price: $2,657.00
Brand: Powermatic
Model: 1610079
|
1610079 Features: -8'' parallelogram jointer.-PJ882. Specifications: -2HP,1Ph. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 44'' H x 28'' W x 84'' D.
When we look at jointers, there are a couple of tests at the top of our list, and this model aces them all. First, it’s got a generous 8-inch wide bed, and you can’t do better than that. But icing on the cake is the bed’s luxuriously long 82 inches, giving you absolute support and accuracy on the infeed side. We like the way the infeed table travels up and down; instead of a handwheel, you just loosen the locking lever and move the long-handled table adjustment arm. Leverage is our friend, and there’ll be no more skinned knuckles! Lock the lever again and you’re ready to cut. When you want to cut rabbets – a beautifully simple job on this jointer -- override the 1/8-inch depth limit by turning the control knob. Twist it again to re-engage this feature. The outfeed table adjusts to knife height easily, should your jointer not retain its factory setting during shipment. It’s worth checking. We like this fence best of all the competitors for a couple of reasons. There’s a non-marring insert in the fence contacts that prevent scratching the infeed and outfeed tables while you’re adjusting it. The fence rides smoothly across the beds and locks easily. But its best trick is tilting 45 degrees – both forward and backward, giving you a total angle to the back of 135 degrees for beveling. And instead of grasping the whole fence to tilt it, this one moves beautifully by handwheel. The three-knife cutterhead should be perfectly adjusted from the factory, but to be safe, we recommend checking it before running any stock. The head turns at 7,000 rpm, giving you 21,000 cuts per minute and a super-smooth surface. The final feature that won our admiration is the placement of the power switch. You’ll find it below the infeed bed on most jointers, but on this Powermatic, it’s positioned on its own arm above the infeed table. We like this spot best for safety’s sake – a jointer is a beautiful machine, but with just a little operator error, it has the potential to maim. Having the power switch in the open just makes good safety sense. We recognize that a jointer like this is a big investment, but we trust the Powermatic name for quality, reliability and a long life. You won’t regret this purchase. --Kris Jensen-Van Heste
Features:
- Infeed/outfeed surface measures 8-by-82-Inch
- Depth of cut limitation easily overridden for rabbeting cuts
- Fence tilts 45 degrees to back and front; handwheel operation
- No-mar fence insert keeps beds pristine during fence adjusent
- 7,000 rpm cutterhead gives you 21,000 cuts per minute; limited lifetime warranty
Similar Products:
|
|
| Powermatic 1791291K Model 31A 6-Inch/12-Inch 1-1/2 Horsepower Belt/Disc Sander, 115/230-Volt 1 Phase
Lowest new price: $1,439.99
List price: $1,639.00
Brand: Powermatic
Model: 1791291K
|
1791291K Features: -Belt with manual switch.-Model 31A.-Belt: 6'' x 48''. Specifications: -1-1/2HP, 1Ph, 115V/230V. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 54.5'' H x 31.25'' W x 24'' D.
Loaded with innovative features, the Powermatic 31A Belt/Disc Sander has the power to accomplish even the most demanding tasks. Its heavy-duty, full cast-iron construction allows both metalworking and woodworking to be done on the same machine, saving space and money while maximizing the capabilities of both abrasive types. | The 31A Belt/Disc Sander
At a Glance:- For both metal and woodworking applications
- 1-1/2 hp TEFC motor mounted within enclosed base cabinet
- Large 17.25" by 9" cast-iron table provides solid, spacious platform
- 4" dust port keeps shop and air clean
- Miter gauge slots and positive stops for fast setup
|
| |
|
The table tilts up to 45°. View larger. |
Powerful 1-1/2 Horsepower Motor
The Powermatic 31A is a solid, full-feature sanding machine that has a 1-1/2 horsepower TEFC (totally enclosed fan cooled) motor mounted within the enclosed base cabinet. The 31A comes wired for 115-volt, 12-amp, one-Ph current, yet it can be converted to use 230-volt, six-amp power for greater versatility.The motor delivers power to the belt and disc units via a pair of balanced pulleys and a V-belt. The belt is easily accessible for tensioning adjustments through a large door on the rear of the base cabinet. Fully Welded Base Cabinet for Stability
The fully welded, all-steel enclosed base cabinet measures 20.0 x 27.5 x 17.25 inches (W x H x D), providing a stable platform for the entire machine in addition to enclosing and protecting the motor and dust collection chute. The height of the base cabinet places the disc sanding table 34.5 inches off the floor and the belt (in the horizontal position) to 37 inches. These heights plus the total weight (246 pounds) and stability of the cabinet make the Powermatic 31A easy and comfortable to work with. Cast-Iron Table Provides Ample Workspace
A large 17.25- by 9.0-inch cast-iron table provides a solid, spacious platform that both supports and stabilizes even the largest project pieces. The table tilts up to 45 degrees and is secured by large hand wheels on either side. A full-sized miter slot accepts the included miter gauge, making it easy to build specialty jigs. Versatile, User-Friendly Operation
The Powermatic 31A offers true versatility. First, the belt can be used in both the horizontal and vertical positions--and just about any angle in between. The multipurpose cast-iron table allows you to work at different angles, giving you greater project flexibility. You can also remove the top guard for contour sanding jobs. To help ensure long life and user-friendly operation, the Powermatic 31A features a four-inch-diameter dust port for effective dust evacuation to keep your shop and your air cleaner, improve visibility, and protect components from damaging debris. At the same time, the cast-iron table with miter gauge slots and positive stops make setup fast, accurate, and simple for any angle. The Powermatic 31A is backed by a five-year warranty. What's in the Box
One Powermatic 31A, one abrasive belt, one abrasive disc, one disc table assembly, one fence assembly, one miter gauge assembly, two bags of fasteners, one stand with motor, one dust outlet, manual, and warranty card.
The belt can be used in both the horizontal and vertical positions.
For contour sanding, the top guard is easily removable. |
Features:
- Heavy, cast-iron construction and fully enclosed stand minimize vibration
- Powerful, 1-1/2HP motor can tackle any sanding task
- 12-inch balanced disc with table tilt
- Multi-position belt head with indexing pin and head lock allows for tool-free belt position changes
- Table for belt head tilts 0-45 degrees downward with miter gauge slot and is adjustable for various angles
Similar Products:
|
|
| Powermatic 2328001 Table Insert for PM Model 66
Lowest new price: $53.43
Brand: Powermatic
Model: 2328001
|
Features:
- Reduces virtuallly all splintering and tearout on tablesaws
- High Density Phenolic laminate
Similar Products:
|
|
| Powermatic 2042377 Mobile Base for Model PWBS14 Band Saw
Lowest new price: $179.99
Lowest used price: $108.41
List price: $235.00
Brand: Powermatic
Model: 2042377
|
Mobile base for Powermatic 14" bandsaw
Features:
- Heavy-duty steel tubular frame
- Non-marking wheels that lock
Similar Products:
|
|
| Powermatic 1791216K Model PWBS-14CS Deluxe 14-Inch 1-3/4-Inch Woodworking Bandsaw with Bearing Guides, Lamp, and Chip Blower, 115/230-Volt 1 Phase
Lowest new price: $1,199.99
List price: $1,463.00
Brand: Powermatic
Model: 1791216K
|
60 watt halogen lamp built into the body, providing direct light on blade and workpiece while cutting. Chip blower ensures a clean, visible cut line. Extra-large, two-piece cast iron table consists of a 15 x 15 tilting. (45 degrees right, 10 degrees left) section and a fixed 15 x 5 extension for a total working surface area of 15x20. Balanced, nine-spoke cast iron wheels run smoothly. Easy-to-read tensioning gauge settings indicated in blade width increments. CARTER quick tension release lever speeds blade changes. Features durable micro-adjustable dual bearing blade guide system above and below the table. Full 6 under-guide capacity with 13-1/2 frame-to-blade clearance. Built in 4 dust port. Poly V-belt maximizes power transmission while minimizing noise and vibration. Frame mounted push-button switch. Rigid one-piece welded stand requires no assembly. Includes: 1791216K 14-inch band saw, adjustable rnitre gauge, rip fence with resaw assembly, 1/4-inch band saw blade, and gooseneck work light and chip blower, and stand.
With an extra large, two-piece cast-iron table and balanced nine-spoke cast-iron wheel, the Powermatic PWBS-14CS 14-Inch Woodworking Band Saw is a capable, user-friendly machine ideal for professional woodworkers and hobbyists. Its rugged design offers uncompromising accuracy and durability; while a host of innovative features let users tackle a range of heavy-duty jobs with precision and control. | The PWBS-14CS 14-Inch
Woodworking Band Saw
At a Glance:
- Features Carter quick-tension lever for speedy blade changes
- Easy to read tensioning gauge settings indicated in blade width increments
- Precision balanced, nine-spoke cast-iron wheels reduce vibration
- 60-watt adjustable lamp built into the body (bulb not included)
- Rigid, one-piece welded stand that requires no assembly.
|
| |
|
The rugged cast-iron table effectively handles both large and small projects.
View larger. | 
The table easily tilts to help you get the right angle for the job. View larger.
|
Solid, Sturdy Backbone for Vibration-Free Operation
A huge iron casting provides a solid foundation that keeps the PWBS-14CS rigid and vibration free.The heavy-gauge, steel base cabinet adds to the unit's overall stability and provides a solid,vibration-absorbing base for the motor. Because dust collection does not pass through the base cabinet,its interior remains virtually dust free, reducing routine maintenance while enhancing the long life of the motor and drive belt.To help improve visibility and the air quality of your shop, the PWBS-14CS features a four-inch diameterport cast into the lower housing, directly below the blade, for effective dust evacuation. And tokeep the cut line clearly visible, an integral air pump supplies pressurized air to an adjustable nozzleattached to the upper blade guide, resulting in a chip blower that provides a clear line. Extra-Large Work Table
To effectively handle projects both big and small, the PWBS-14CS features an extra-large,two piece cast iron table with a tilting section measuring 15.0 x 15.0 inches and a fixedextension measuring 15.0 x 5.0 inches for a total working surface area of 15.0 x 20.0 inches. Optimum Power and Drive
The PWBS-14CS is powered by a one and one-half-horsepower TEFC (totally enclosed fan cooled)industrial-style motor that comes wired for 115-volt operation, but can be converted to 230 volts.The motor power is delivered through a set of precision-machined multi-groove pulleys that aredriven by a poly-V drive belt system, known for its smooth, efficient transmission of power withvery little temperature buildup. For their part, the cast-iron drive wheels are fully machined,painted, and fitted with high quality tires and then dynamically balanced to ensure smooth operation. Easy Adjustments
With the PWBS-14CS, adjustments are never a problem, due to the blade width markings on thetensioning block for blade widths from one-eighth- to three-quarter-inch. The infiniteadjusting system also lets users dial in the correct tension for specialty blades that mayrequire non-standard tension settings. This model comes with the legendary, Carter quick-release handle assembly that features three positions:full tension, relaxed tension, and full release. Users can move the Carter between all three positionswithout losing the tension setting, potentially lengthening the life of the blade. User-Friendly Features
The PWBS-14CS also includes an exclusive design, quick-release, precision T-square-style rip fence withfour-inch re-saw attachment; 60-watt adjustable lamp (bulb not included) built into the body to providedirect light on blade and work piece while cutting; and a full six-inch under-guide capacity with 13-1/2-inch width capacity. Dimensions and Warranty Information
The PWBS-14CS measures 34.0 x 68.0 x 20.0 inches (W x H x D), weighs 250 pounds, and is backed by a five-year warranty. What's in the Box
One PWBS-14CS saw body; one poly-V drive belt; one trunnion support; one main table; one extension table; two table lock knobs; one table pin; one work light; one blade hook; two fence hooks; two miter gauge hooks; one bag of fasteners; one rip fence and rail assembly; one blade tension handle; one stand with motor; one miter gauge; one pulley cover; one fence body; manual; and warranty card.
Features:
- 14-inch band saw; built-in air pump clears chips; fully enclosed motor for longevity
- 1-1/2-horsepower motor; table tips 45-degrees right and 10-degrees left
- Solid steel and cast-iron construction for durability; built-in halogen lamp
- Includes saw, motor, blade, foot brake, work light, rip fence, mitre-gauge, chip blower
- 15-inch by 15-inch table; 44-inch table height; 20 by 34 by 68 total dimensions; 203-pounds; 1-year warranty
Similar Products:
|
|
| Powermatic 1352001 Model 3520B 20x35-Inch Wood Lathe with RPM Digital Readout
Lowest new price: $3,999.99
List price: $4,830.00
Brand: Powermatic
Model: 1352001
|
1352001 Features: -Lathe.-3520B. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 31'' H x 27'' W x 55'' D.
The Powermatic 3520B Woodworking Lathe retains all the features of classic Powermatic lathes--including a sliding headstock, electronic variable-speed control, and a spindle lock--plus some great innovations. To name just a few, a digital RPM readout makes it a snap to keep track of your speed, a redesigned tailstock offers internal storage, and a laser etched quill conveniently self ejects. With the 3520B, you'll get classic reliability and advanced technology--the best of both worlds to help you handle your most important jobs.  | The 3520B
Woodworking Lathe
At a Glance:
- Powerful motor with inverter for 3-phase or single-phase input
- Built-in spindle indexing for drilling hole patterns and routing flutes
- Sliding headstock with electronic variable speed and digital RPM readout
- Tailstock offers internal storage
- Optional dust assembly can travel with the toolrest
|
|  |
|
Controls and belt access are conveniently located on the front of the headstock. | 
The standard comparator mounts make turning sets of duplicate projects easy. |
Versatile to Suit a Range of Projects
With wide-ranging capabilities, the Powermatic 3520B is ideal for both novice users and seasoned veterans. Incredibly adaptable, the Powermatic 3520B features a 20-inch swing and 34-1/2 inches between the centers to accommodate a huge range of project sizes.For additional versatility, the included pin can be screwed into the spindle housing to provide up to 24 indexing positions for drilling hole patterns or routing flutes and other equally spaced decorative finishes. Powerful Motor for High Torque
Driven by a two-horsepower, 220-volt, 6.2-amp, TEFC (totally enclosed fan-cooled) motor, the Powermatic 3520B offers plenty of muscle to get the job done. And because it's equipped with an inverter, the motor can operate with either a single-phase or three-phase input. The motor itself is three phase and receives a single-phase current from the inverter for high torque at low-end, maintenance-free operation. And to help all that torque efficiently make its way to your workpiece, the motor delivers power through a pair of two-range, multi-groove pulleys that are connected by a durable poly V-belt to prevent surging. Durable and Resistant to Vibration
Built with precisely machined, thick-walled iron castings, this 682-pound lathe is rigid and stable. It is exceptionally solid and effectively resists vibrations caused by out-of-balance workpieces--so you won't have to worry about bulky sandbags or weights. Cleverly Designed Headstock for Easy Adjustments
A sliding headstock with electronic variable speed and digital RPM readout provides accurate speed adjustment. What's more, a spindle locking mechanism in the form of a spring-loaded button on the front of the headstock engages one of two locking detents (180-degrees apart) for installing and removing accessories that screw onto the 1-1/4-inch by 8 spindle threads. Tailstock Includes Built-In Storage
To support large workpieces, the tailstock is made from heavy iron casting. For convenience, a compartment--complete with hinged access door--is built into the tailstock casting to store small often-used tools and equipment. For additional storage options, there's even an attached tool caddy for quick access to centers, wrenches, and more. To top it off, ergonomic chrome-tipped handwheels ensure a comfortable feel, and an optional dust assembly can travel with the toolrest to help maintain proper visibility of your workpiece. The Powermatic 3520B is backed by a five-year warranty. What's in the Box
One lathe bed with headstock, tailstock, and tool support base; two leg assemblies; one guard; one 14-inch tool support; one 13-inch face plate; one live center; a one-inch spur center; one index pin; one live center pin; one knockout rod; one face plate wrench; one tool caddy; four levelers; 12 socket hd.cap screws; 12 lock washers; 10 flat washers; two comparator centers; one comparator rear bracket with lock handle; owner's manual; and warranty card.
Based on precisely machined, thick-walled iron castings,
the Powermatic 3520B Lathe is both rigid and stable. |
Features:
- Wood turning lathe with digital RPM readout, 20-inch swing, and 34-1/2-inches between center
- Powered by a 2-horsepower, 220-volt, variable speed motor
- Made of heavy-duty cast iron, Assembly required
- Accessories-include guard, tool rest, face plate, wrench, knockout rod and spindle lock
- 50x24x44-inches; Backed by 1-year warranty
Similar Products:
|
|
| Powermatic 2042376 Mobile Base for Model 60B Joiner
Lowest new price: $199.99
List price: $235.00
Brand: Powermatic
Model: 2042376
|
Includes Mobile Base for 60C, 60HH - 2042376
Features:
- Wheeled mobile base for Powermatic Model 60B Joiner
- Fixed wheels at the front, swivel casters in back
- Wheels can be locked in place
- Includes screws, nuts, and washers for assembly
Similar Products:
|
|
| Powermatic 6286425 Replacement Lower Bag for Model 73
Lowest new price: $7.94
List price: $9.99
Brand: Powermatic
Model: 6286425
|
Features:
- Plastic lower bag for model 73
- easy to use disposability
|
|
Next >>
Page 1 of 5
[Kindle]
[Kindle DX]
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED AS IS AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
|
