Tools — Air Compressors

Air Compressors

PORTER-CABLE C2002-WK Oil-Free UMC Pancake Compressor with 13-Piece Accessory Kit

Lowest new price: $159.00
Lowest used price: $106.08
List price: $317.77
Brand: PORTER-CABLE
Model: C2002-WK

This highly portable oil free pancake-style air compressor packs a punch with an induction motor that provides improved performance and extended life, whether you're filling tires or firing a nailer. Complete with a soft-start motor, the C2002-WK can easily run off of normal household circuits and is able to run at 3.5 SCFM for faster recharge of its 6-gallon tank. The motor features replaceable brushes in order to extend motor life and 150 PSI max pressure to allow for extended run time. It also includes 120 PSI cut-in pressure that provides 30 PSI "Bonus Air" and High-Flo air regulator to protect against a large pressure drop. The C2002-WK includes a 13-Piece Accessory Kit with a 25-foot nylon hose, blow gun and attachments, tire chuck, tire gauge, quick coupler, plugs and Teflon tape.

Features:

150 psi max tank pressure stores more air in the tank for longer tool run times
2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217
Air coupler and plug are factory installed on the air hose to save user labor and to prevent leaks
6-gallon pancake-style tank for stability includes water drain valve and rubber feet
Low-amp 120-volt motor starts easily in cold weather or with an extension cord
Equipped with a durable oil-free pump for long life and no maintenance
Shroud, handle, and console cover protect vital components and make unit easier to carry

Similar Products:

PORTER-CABLE CMB15 150 PSI 1.5 Gallon Oil-Free Fully Shrouded Compressor

Lowest new price: $100.99
List price: $189.20
Brand: PORTER-CABLE
Model: CMB15

The Porter-Cable CMB15 150 psi, 1.5 gal Oil-Free Fully Shrouded Compressor runs a 2.0 SCFM at 90 psi allowing for quick compressor recovery time, per ISO1217. The 1.5 gallon tank is fully shrouded and is easy to carry. It includes a water drain valve and rubber feet. The 150 psi max tank pressure stores more air in the tank for longer tool runtimes and the durable oil-free pump allows for long life and no maintenance. The low Amp 120V motor starts easily in cold weather or with extension cord and at only 20-Pound it is easily portable. It has a low noise motor at 79 dBA (Tested per ISO3744) for a quieter work environment. The fully enclosed design provides protection from hot or moving parts. Includes a 25-Feet coil hose and 8 pc accessory kit facilitate a number of inflation tasks. Includes a 1 year warranty on compressor components.

Features:

2.0 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217
1.5 gal tank in shroud is easy to carry, includes water drain valve and rubber feet
150 psi max tank pressure stores more air in the tank for longer tool runtimes
Durable oil-free pump for long life and no maintenance
Low Amp 120V motor starts easily in cold weather or with extension cord

Similar Products:

Makita MAC2400 Big Bore 2.5 HP Air Compressor

Lowest new price: $299.00
Lowest used price: $269.20
List price: $493.60
Brand: Makita
Model: MAC2400

Makita's 2.5HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability under tough job site conditions.

View larger
MAC2400 Features
PERFORMANCE - Cast-iron cylinder with greater bore and stroke for maximum performance
DURABILITY - Runs at a lower RPM (1,720) resulting in greater motor and pump life
RELIABILITY - Low AMP draw reduces instances of tripped breakers
CONVENIENCE - Oil drain and oil sight glass conveniently located for easy access and maintenance
INCLUDES - Oil and 1/4" universal quick coupler
Tool Specifications
Horsepower 2.5
Pump Oil-lubricated
Tank 4.2 "Twin Stacked" gal.
Performance 90 PSI: 4.2 cfm
40 PSI: 4.8 cfm
Maximum
Pressure 0 - 130 PSI
AMPS 12.3
Noise Level 79 dB
Size 19-3/8"x18-3/4"x18"
Net Weight 77 lbs.
2.5 HP with Big Bore Engineered Pump
The MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job-site conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications
The MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC2400 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors
Makita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box
Makita MAC2400 2.5 HP Air Compressor, oil and 1/4-inch universal quick coupler.

Features:

Oil lubricated: Cooler running pump, minimizes wear
Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
Built-in thermal overload for additional motor protection
Large automotive style industrial air filter for increased air intake and greater efficiency
One-year manufacturer's warranty

Similar Products:

Senco PC1010 1-Horsepower Peak, 1/2 hp running 1-Gallon Compressor

Lowest new price: $114.99
Lowest used price: $103.59
List price: $149.00
Brand: Senco
Model: PC1010 Compressor

Includes PC1010, 1 Gallon Electric Oil-Less Hand-Carry Compressor - PC1010

Designed especially for finish and trim work as well as a variety of crafts and hobbies, the Senco PC1010 Compressor is a lightweight and ultra-quiet choice. This 1 HP compressor offers high performance in a compact, portable package and provides ample pressure for a wide range of small to medium jobs that require the use of pneumatic tools.

The Senco PC1010 Compressor:
Is easily portable at just 20 pounds.
Delivers 20 to 44 drives per minute.
Offers durability thanks to an aluminum cylinder.

The PC1010 is easily transported from site to site. View larger.

With 1 HP of power, the PC1010 lets you easily install door casings and floor molding.
Lightweight and Portable for Easy Maneuverability
Weighing in at just 20 pounds, the PC1010 is easy to carry from site to site as you work. And because it measures a compact 12.5 x 10.3 x 14 inches (WxHxD), it's ideal for jobs with limited work space. A cushioned handle grip makes it comfortable to carry and hold, and its compact size also means it won't take up too much room in your shop.

Efficient, Mess-Free Operation
Capable of delivering 20 to 44 drives per minute, depending on the tool and application, the PC1010 features a direct drive motor/pump that provides extra-efficient operation for a variety of jobs. And the pump is lube-free, which means you won't have to worry about the mess and disposal issues involved with working with oil. An aluminum cylinder offers reliable durability.

Versatile Enough for Both Professionals and DIYers
With a one-gallon capacity, the PC1010 is ideal for a range of renovation and home improvement jobs, as well as for hobbies and crafts. Additionally, it takes only 128 seconds to pump up and 35 seconds to recover, so you won't waste valuable time waiting to have enough power to complete your jobs.

Significantly quieter than pancake compressors, the PC1010 makes very little noise while running, so you won't have to worry about disturbing neighbors or waking napping babies while completing in-house jobs. And its rubber-covered feet won't scratch hardwood floors, so you can feel comfortable using it in your home.

The PC1010 is backed by a one-year warranty.

About Senco
For over 50 years, Senco Products, Inc. has provided high-quality products to make it easier for both professionals and remodelers to complete a wide variety of renovation, construction, and industry work. Based in Cincinnati, Ohio, with distributors worldwide, Senco is one of the leading manufacturers of pneumatic and powered fastening systems, as well as the fasteners they drive. Their tools boast superior workmanship and are used in a variety of industries, including home construction and remodeling, cabinet and furniture assembly, manufactured housing and industrial packaging.

What's in the Box
Senco PC1010 Compressor, regulator, pressure gauges, 1/4-inch universal coupler, and air filter.

Features:

Lightweight and portable--easy to carry from site to site as you work
One horsepower peak ,1/2 horsepower runningand one-gallon capacity
Ideal for a range of renovation and home improvement jobs, as well as for hobbies and crafts
Delivers 20 to 44 drives per minute
Backed by a one-year warranty

Similar Products:

Campbell Hausfeld FP209499 3-Gallon Air Compressor

Lowest new price: $74.61
Lowest used price: $50.00
List price: $129.99
Brand: Campbell Hausfeld
Model: FP209499

Features:

User-friendly design and control panel
Three-gallon tank for greater stored air power
Cooler-running motor
Tank eliminates pulsations caused by piston action
Accessory kit included

Similar Products:

Makita MAC700 Big Bore 2.0 HP Air Compressor

Lowest new price: $199.00
Lowest used price: $179.28
List price: $323.40
Brand: Makita
Model: MAC700

Makita's 2.0 HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output, less noise and improved job site performance. The MAC700 delivers industrial power and results with improved durability under tough job site conditions.

View larger
MAC700 Features
PERFORMANCE - Low noise, low AMP draw in high output
DURABILITY - Runs at a lower RPM (1,720) resulting in greater motor and pump life
RELIABILITY - Low AMP draw reduces instances of tripped breakers
CONVENIENCE - Oil drain and oil sight glass conveniently located for easy access and maintenance
INCLUDES - Oil and 1/4" universal quick coupler
Tool Specifications
Motor 2.0 HP
Pump Oil-lubricated
Tank 2.6 "Hot Dog" gal.
Performance 90 PSI: 3.3 cfm
40 PSI: 3.8 cfm
Maximum Pressure 0 - 130 PSI
AMPS 12.4
Noise level 80 dB
Size 18"x10"x22"
Net Weight 52 lbs.
2.0 HP with Big Bore Engineered Pump
The MAC700 is powered by a 2.0 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC700 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC700 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 2.6-gallon tank sustains an operating pressure of 130 PSI, and delivers 40PSI (3.8 CFM) and 90 PSI (3.3 CFM). The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications
The MAC700 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC700 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

What's in the Box
Makita MAC700 2.0 HP Air Compressor, oil and 1/4-inch universal quick coupler.

Features:

Cast iron pump with big bore cylinder and piston, combined with greater bore and stroke, delivers maximum performance
Substantially lower noise levels with a large 1,720 RPM pump, enabling greater displacement at lower RPM
Low amp draw reduces incidences of tripped breakers and voltage drop that can cause premature motor failure
Oil lubricated provides cooler running pump, minimizes wear
One-year manufacturer's warranty

Similar Products:

Wagan Power Dome EX 400-Watt Jump Starter with Built-In Air Compressor

Lowest new price: $112.45
List price: $174.95
Brand: Wagan
Model: EL2454

Power Dome EX is a multi-purpose portable & rechargeable emergency power source. It can be used as a power source for 110volt AC or 12volt DC applications such as computers, TVs, fax machines, audio, fans, electrical tools, etc. It can also start your car engine in an emergency situation. Recommended to fully charge 24-36 hours before initial use, after each use and every 6 months. Safety Features: Overload protection, short circuit protection and UL listed.

The Wagan 400-Watt Power Dome EX is a powerful portable power source designed to provide AC and DC power and functionality wherever you need it. Built around a rechargeable 18 amp-hour sealed lead-acid battery, the Power Dome EX provides enough jumpstarting power to revive all but the largest of car batteries, while its built-in 260 PSI air compressor can be used to quickly inflate car tires and sports equipment. It contains one DC outlet and two grounded AC outlets which utilize the built-in 400 watt inverter. Additional features include: heavy-duty 6 gauge / 24 inch battery clamps, a 5-LED work light, a USB power port, a built-in AM/FM radio, an audio output jack and more.

Front view of the Wagan 400-Watt Power Dome EX Jumpstarter using DC power to charge a handheld device

Convenient power to deal with any situation you encounter on the road.
View larger.

A Multifunctional Device for Everyone to Use and Enjoy

The Wagan 400-Watt Power Dome EX jumpstarter with built-in air compressor is an amazing all-in-one portable unit that provides versatility and power exactly when you need it, whether it's on the road, at a campsite, at home, etc. With it you can always arrive to your destination safely, plus have your trusted electronics charged and ready for use. Keep the Power Dome EX in your trunk and have confidence that you would be prepared for a roadside emergency. With the Power Dome EX you can inflate your own tires and jumpstart your own weak or dead vehicle battery - that means never having to wait for a tow truck or flag down an unknown driver passing through. Plus use the high intensity 5 LED lights if you experience vehicle troubles at night.

The Wagan Power Dome EX also offers maximum convenience. Are you going camping or plan on being in an area without electrical outlets nearby? No problem. The Power Dome EX has two, three pronged AC outlets providing up to 400 watts, with 800 watt peak surge power of 110 volt house current. It also has one DC outlet to power 12 volt appliances away from your vehicle. Sample appliances serviceable include: laptops, power tools, video games, TVs, cell phones, MP3 players, digital cameras, etc. Plus the powerful 260 PSI air compressor also inflates sports balls (needles included), rafts, air mattresses, etc., while inflating 16" tires in only 5-10 minutes. Another useful feature is the AM/FM radio with antenna. Stay informed by listening to the latest news and weather updates during a blackout or emergency. In addition, the Power Dome EX also has a built-in USB power port to charge your MP3 player, digital camera or cell phone. It even allows for use of its audio input socket to listen to your MP3 or CD player. Finally the Wagan Power Dome EX's rubber housing on the handle and along its perimeter ensure the item's strength and durability for many years to come. This comfortable handle allows for easy portability from one vehicle or location to another, providing power wherever you go.

AC charging adapter included with the Wagan 400-Watt Power Dome EX

Charge with standard household AC power with included adapter.
View larger.

DC charging adapter included with the Wagan 400-Watt Power Dome EX

DC adapter allows for in-car charging while motor is running.
View larger.

Air compressor inflation accessories included with the Wagan 400-Watt Power Dome EX

Included inflation accessories allow the built-in compressor to inflate everything from tires to sports equipment.
View larger.

Easy to Charge and Maintain

The Power Dome EX contains a rechargeable 18Ah sealed lead acid battery. AC and DC adapters are included for recharging at home or in your vehicle while you drive. After the initial charge, it's recommend that you charge the unit for around 34 hours every 2 to 3 months, or more often if the product has been used frequently. Press the battery status indicator to view how charged the item is on the volt meter readout.

Key Features

600 Amp jump starter with heavy duty cable and clamps
260 PSI high flow air compressor with easy-read analog pressure gauge for inflating tires and accessories
400 watt power inverter (800 watts peak)
Two grounded 115 volt AC outlets
One 12 volt accessory outlet for powering DC appliance (loads to 11 Amps)
One USB power port for charging/operating cell phones, PDAs, and MP3 players
AM/FM radio with built-in speaker and audio input jack for headphones
Bright area light – LED type for long battery life
AC recharging adapter; DC recharging adapter (fused)
Easy-read analog voltmeter for checking battery status
Jump start cable polarity indicator for safety

Specifications

Battery - Sealed lead-acid battery/rechargeable/12 volt/18 amp-hours
Work Light - 5 LED
Compressor - 260 PSI; 1.5 ft high-pressure air hose; analog gauge
Inverter - 2 AC Outlets (115 volts AC 60 Hz)
Maximum Inverter Output Power - 400 Watts
Peak Power - 800 watts peak surge for a max of 0.3 sec
I2V Accessory Outlet - I2 volt, 11 amps max
USB Power Port - 5V up to 500 mA
AM/FM Radio - AM 520 to 1710 kHz/FM 88 to 108 MHz
Audio Output Jack - 3.5 mm diameter (1/8 inch)
Max Recharging Time (AC) - 34 hours
Max Recharging Time (DC) with Engine Running - 12 hours
Jumper Cables and Clamps - 6 Gauge heavy-duty clamps, 24 inches

What's in the Box

Wagan 400-Watt Power Dome EX Jumpstarter with Built-in Air Compressor
AC and DC adapters to recharge the item
Air compressor accessories (needles)
Instruction manual

One-Year Limited Warranty

Wagan offers a (1) one-year limited warranty for defective items only. Customers have 1 year from the date of purchase to submit their warranty claim to our customer service department if an item is defective. Valid proof of purchase is required to activate the warranty, with additional warranty details are listed on the insert card that is shipped with your purchase.

About Wagan Corporation

Wagan Corporation is in the business of high-tech automotive accessories. They are committed to delivering products that support the needs of today's and future fast paced lifestyle with comfort and convenience. Wagan Corporation emerged with production in the automotive accessory market with simpler items now to more innovative products for laptops, cellular phones, travel and mobile accessory segments. They design and focus their products to support the lifestyle of "people-on-the-go." Wagan Corporation is able to use economics of scale to offer consistently reasonable prices to develop long term relationship with retailers. As a global supplier of automotive accessory products, quality and customer satisfaction are always our top priorities.

Features:

600 cranking amp auto jump starter
260 PSI high power motor air compressor; Has 2 AC Outlets and 1 DC outlets
400 watt AC power inverter, high intensity LED light
Built-in AM/FM radio with iPod™ input
This item cannot be returned and has additional shipping restrictions

Similar Products:

Makita MAC5200 Big Bore 3.0 HP Air Compressor

Lowest new price: $349.00
Lowest used price: $304.05
List price: $583.80
Brand: Makita
Model: MAC5200

Power and performance to run two framing nailers. Contractor air compressor features a low profile for easy storage (with handle folded), rugged wheels for jobsite portability, cast iron cylinders, industrial air filter, thermal overload protection and more. HP: 3, Dimensions L x W x H (in.): 30 x 20 1/2 x 21, Noise Level (dB): 90, Portable or Stationary: Portable, Working Pressure (PSI): 110-140, Volts: 115, CFM at 40 PSI: 6.9, CFM at 90 PSI: 6.5, Pump: Oil-lubricated, cast iron, Tank Type: Horizontal, Max. PSI: 140, Air Tank Size (gal.): 5.2, Amps: 13.8, Duty Cycle: 50%, Stage: Single, Air Outlet Size (in.): 1/4, Motor Phase(s): Single

Makita's 3.0 HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC5200 delivers industrial power and results with improved durability, and includes rugged wheels and folding handle for easy transport.

View larger
MAC5200 Features
POWER - 6.5 CFM @ 90PSI; powerful enough to run two framing nailers
PERFORMANCE - Cast-iron cylinder with greater bore and stroke for maximum performance
DURABILITY - 8" pneumatic wheels make the compressor portable through any jobsite terrain
CONVENIENCE - Oil drain and oil sight glass conveniently located for easy access and maintenance
INCLUDES - Oil and 1/4" universal quick coupler
Tool Specifications
Horsepower 3.0
Pump Oil-lubricated
Tank 5.2 gal.
Performance 90 PSI: 6.5 cfm
40 PSI: 6.9 cfm
Maximum Pressure 0 - 140 PSI
AMPS 13.8
Size 29"x19"x19-1/2"
Net Weight 88 lbs.
3.0 HP with Big Bore Engineered Pump
The MAC5200 is powered by a 3.0 HP motor with built-in thermal overload for additional protection. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC5200 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The 5.2 gallon tank sustains an operating pressure of 140 PSI and delivers 40PSI (6.9 CFM) and 90 PSI (6.5 CFM), enough for two nailers. The oil-lubricated pump runs cooler, and the finned discharge tubing dissipates heat more efficiently. The roll-cage construction is built for extra protection for the pump and motor assembly, helping it withstand harsh jobsite environments. Ease-of-use and convenience features include tool hangers, a built-in storage compartment for air fittings and accessories, and an air hose wrap to store 50 feet of 3/8-inch air hose with handle folded or upright. Other features include a convenient oil drain and oil sight glass, and a tank drain valve that supersedes standard petcock design for easier maintenance.

Versatile Design for a Range of Applications
The MAC5200 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC5200 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

What's in the Box
Makita MAC5200 3.0 HP Air Compressor, oil and 1/4-inch universal quick coupler.

Features:

Folding handle: Low profile for easy storage with handle folded
Rugged wheels: Job-site portability; One-year manufacturer's warranty
Built-in storage compartment; Conveniently stores air fittings and accessories
Air hose wrap: Stores 50 feet of 3/8-inch air hose with handle folded or upright
120V; 13.8 Amps and 1800 watts

Similar Products:

Campbell Hausfeld FP2028 1-Gallon Oil-Free Pancake Air Compressor with Accessory Kit

Lowest new price: $65.99
Lowest used price: $51.74
List price: $119.99
Brand: Campbell Hausfeld
Model: FP2028

High power for inflation, brad nailers, staplers, and air brush equipment; 1-gallon tank for smoother air flow; cooler-running motor; automatic shutoff; sturdy handle for easier storage and handling; easy-to-read pressure gauge; comes with 25-foot coiled hose, inflation needle and adapter, two inflation nozzles and air chuck.

Great for inflation, brad nailing, stapling, and air brushing, the Campbell Hausfeld FP2028 One-Gallon Air Compressor quickly inflates and fastens to save you time and money. With its tank that eliminates the pulsations caused by piston action, this compressor will give you smooth, consistent performance.

FP2028 One-Gallon
Air Compressor
Applications:
Completing over 25 inflation and fastening projects
Inflating car and bike tires
Inflating sports balls
Upholstery
Air brushing
Cleaning workbench areas and equipment

This versatile compressor is your go-to tool for over 25 inflation and fastening projects.
View larger.
Air Power Completes Jobs Faster and Less Expensively
Whether you're a do-it-yourselfer working around the house or in your garage, you'll complete home repair and tire inflation jobs faster and less expensively with the FP2028 One-Gallon Air Compressor.

With this air compressor, you will be able to reap the benefits of inflation tools and air-powered fastening tools. Compared to electrically powered tools, air tools have significantly lower initial costs and notably longer lifespans. They also deliver more torque and higher RPM than their electric counterparts, which means they'll help you get your work done more efficiently.

Perfect for a Wide Range of Applications
Delivering 100 maximum PSI, the FP2028 is ideal for over 25 inflation and fastening projects, including inflating car and bike tires, inflating sports balls, cleaning upholstery, air brushing, and cleaning your workbench area.

Arriving with a five-piece accessory kit and hose, the FP2028 has everything you need to get started on your next job.

Designed with You in Mind
Designed to be user-friendly, the FP2028 One-Gallon Air Compressor is a compact tool that's easy to store and move--its durable handle ensures portability to and from the jobsite.

For further convenience, an easy-to-read gauge is conveniently located on the compressor body for quick, accurate air pressure monitoring. Additionally, the tank eliminates pulsations caused by piston action, so you'll get reliable performance job after job.

Dimensions and Warranty Information
The FP2028 measures 11.8 x 12.7 x 11.8 inches (WxHxD), weighs 12.7 pounds, and is backed by a one-year warranty.

About Campbell Hausfeld: Making it Easier to Do it Like a Pro!
Campbell Hausfeld makes it easier for you to finish your projects like a pro. The company's history of creating quality products began in 1836, when it manufactured horse-drawn wagons and agricultural equipment. Today, the company offers a complete line of air compressors, air tools and accessories, inflators, nailers and staplers, paint sprayers, pressure washers, and more. Finish your projects faster and easier with Campbell Hausfeld.

What's in the Box
FP2028; 25-foot recoil hose; air chuck; inflation needle; inflation needle adapter; and two inflation nozzles.

Features:

User-friendly design
Easy-to-read gauge
100 max PSI
Tank eliminates the pulsations caused by piston action
Accessory kit contains 25-foot recoil hose, female coupler, male plug, air chuck, inflation needle, 2-inch inflation nozzles

Similar Products:

Rockworth RW1504ST 4-Gallon Factory Reconditioned Portable Electric Air Compressor

Lowest new price: Too low to display
List price: $169.99
Brand: Rockworth
Model: RW1504ST

The Rockworth 4-Gallon Portable Electric Air Compressor can help you tackle a long list projects at home or on the job. The air compressor features a powerful 1.5 HP engine and maintenance-free pump. The twin-stack tank configuration on the air compressor can run multiple tools at once. The air compressor is easy to transport thanks to its telescopic handle and sturdy plastic wheels provide portability. 4-gallon, twin-stack, tanks are made of durable steel for durability.

Features:

1.5 HP electric engine provides power and consistency
155 PSI maximum pressure
Delivers 2.8 SCFM at 90 PSI to run multiple finish nail guns or 1 framing nail gun
Twin-stack tank configuration has 2 air outlets for running multiple tools
Oil-free pump means no maintenance

Similar Products:

Apparel & Accessories	Books	Classical Music	DVD	Electronics & Photo	Gourmet Food and Groceries	Health & Personal Care	Home & Garden	Industrial & Scientific	Kitchen
Popular Music	Musical Instruments	Outdoor Living	Computer Hardware	Computer Software	Sporting Goods	Tools	Toys and Games	VHS Video	Video Games